Wide Format Print

Dual Powered Turntable

Highly adaptable Turntable which can be utilised in both long and short-term campaigns thanks to its dual powered option. It's classic design allows it to sit unseen in displays, keeping the focus on the product it carries.

Battery Powered Turntables

Created to showcase products in an engaging and eye-catching manner, our Battery Turntables are perfect for short-term campaigns. Component can be switched on at the beginning of a campaign and left to run throughout.

Mains Powered Turntable

Heavy duty Mains Powered Turntable, allows you to display heavier products without sacrificing performance, turning at a speed of 2.5rpm.

Clip Profile Hinged Data Strip

Speed up the rotation of your POS campaigns with our Clip Profile Hinged Data Strip. Highly versatile, it’s front-loading feature allows signage to be changed without the need to remove the strip from the shelf.

Single Position Data Strip

The Single Position Data Strip offers a front loading shelf-edge solution specifically to fit Tegometall and Caem shelving units.

Front Loading Hinged Barker

Our Front Loading Barker enables you to change POS tickets without having to remove the Barker from the shelf, significantly reducing handling time. Its hinged design allows customers to reach for products below it with ease, or (if used for a price discount), lift up the Barker to see the original price displayed on the Data Strip behind it.

Foam Tape s/a - High Bond ST

Double-sided adhesive Foam Tape for lightweight applications such as mounting signage.

Foam Pads s/a

Double-sided adhesive Foam Pads for mounting lightweight signage. Supplied on a roll.

Banner Tape High Bond

High tack double sided adhesive tape suitable for demanding applications such as banner hemming.

Film Tape s/a - High Bond ST

Strong double-sided adhesive bonding tape suitable for demanding applications.

Film Tape s/a - High Bond Perm/Peel

Double-sided tape with permanent adhesive on one side and removable adhesive on the reverse to prevent surface damage.

Film Tape s/a - Finger Lift

Double-sided adhesive tape with wide fingerlift liner for easy application.

Clear Perm/Peel Discs

Handy self-adhesive discs for mounting posters without leaving residue, supplied in packs of 100 sheets, with 24 discs per sheet.

Magnetic Tape - self adhesive

Self-adhesive Magnetic Tape available in either standard or premium adhesive.

Hook & Loop Coins

1,500 self-adhesive coins, suitable for joining PP, card, board or other light materials together.

Hook & Loop Tape

A 25 metre roll of self-adhesive tape, suitable for joining Polyprop, card, board or other light materials together.

Magnetic Insert Discs - s/a

Self-adhesive magnetic insert discs with strong N35 pull force, designed to insert into cases, box lids and acrylic panels for hidden closure.

Sign Holder S/A Standard

Upright Sign Holder with self-adhesive base.

Sign Holder S/A heavy duty

Suited for gripping thicker card, the Heavy Duty Sign Holder has a self-adhesive base for easy adhesion.

Card Holder S/A

Offering a slightly longer base to the Sign Holder, the Card Holder can be attached to surfaces using the self-adhesive base and holds light duty card.

Sign Holder c/w Magnetic Base

Our selection of transparent Narrow Base Sign Holders are available with either a self-adhesive or strong neo-magnet base, allowing for easy relocation instore.

SignAbracket

The SignAbracket allows you to secure corrugated plastic signs to any type of support surface, in a number of versatile display options. Its versatility allows it to fit around poles, flat surfaces, corners and angles (also suitable for indoor use). The SignAbracket is specially designed to have multiple fixing possibilities, allowing you to secure your signage using screws, cable ties, rivets and even magnets.

Clear Plastic Sign Holder

Clear injection moulded card holder with self-adhesive base.

C-Channel Gripper

Our co-extruded C-Channel Gripper can be used in conjunction with our 86.7928 -Magnetic Under Shelf Bracket or 86.7810 Slatwall Mounting Plate

Hinged Pole Gripper

The Hinged Pole Gripper can be fitted onto poles between 19mm - 25mm Ø and offers a unique hinge action which allows POS material to flex, bouncing back into position if accidentally knocked in-store.

Slatwall Mounting Plate

Fitting a standard slatwall, this Mounting Plate is used extensively with a C-Channel Gripper (86.7939).

Banner Hanger Magnetic Arm

Strong magnetic banner hanger with adjustable 250mm long arm - c/w hooks.

Magnetic Telescopic Banner Hanger

This magnetic banner hanger extends from 570mm-950mm giving you flexibility when hanging your designs. The hanger attaches to shelves with a strong adjustable magnetic component ensuring material is always kept in place, even when your signage is knocked or caught. Being magnetic also gives you the flexibility to move your display, without sacrificing stability or practicality.

Telescopic Banner Hanger - Twin Slot

This telescopic banner hanger is perfect for heavier prints. The hanger has been developed with a twin-slot attachment that locks into retail shelving or racking, allowing strong support for the print, giving it extra protection when knocked in-store. Extendable from lengths 570mm - 950mm, this product provides an adaptable solution that can be adjusted to hold a variety of designs for future use.

Magnetic Under Shelf Bracket

Our magnetic under shelf bracket is the perfect solution for shelf POS signage. The strong plastic bracket has a heavy duty magnet base. The swivel action allows the POS sign to flex when bumped, so it's perfect for use in busy aisles. This works on conjuction with our 86.7929 - C-Channel Hinged Gripper

Adjustable Banner Hanger

Designed to fit neatly onto a standard 39mm scanner rail, this Banner Hanger can hold 190mm graphic and offers 180° movement at the push of a button.

Showcard Stand Square Base

Use the Showcard Base to hold Showcard Pole in an upright position.

Showcard Telescopic Pole & T-Clip

Extendable pole with T-Clip attachment to be used in conjunction with a Showcard Frame and Showcard Base.

Showcard Stand Wire Basket Frame Holder

Pole with spring-loaded mechanism to ensure easy attachment to wire basket or dump bin display. Includes transparent T-Piece to hold Showcard Frame.

Showcard Stand Frames

Ideal for in-store promotion, the Showcard Frame can display double-sided graphics and can be easily accessed to change via side opening.

Showcard Poster Pocket - A4

Non-reflective Poster Pocket to protect print in Showcard Frame.

Showcard Feet

Attach Feet to Showcard Frame for upright free-standing display.

Showcard Attachment - Rotating Clips

Insert Showcard Frame into gripper to hang from inbuilt hook.

Showcard Attachment - Fixed Clips

Fixed Clip for attaching to two sides of a Showcard Frame to enable hanging from cables, wire rails and shelf edges.

Showcard Attachment - Magnetic Clip

With a strong magnetic base, insert Showcard Frame into gripper to hold upright on magnetic surface.

Poster Clamp Skyliner 11

Ideal for instore display, each kit comes with a top and bottom rail, end caps and two hanging clips, so all you need to do is attach your poster and fix to the ceiling.

Poster Clamp Skyliner 24

Designed to hold thinner material, the Skyliner™ 24 is built with a very tight grip and snap-shut frame to help prevent a display from bending or ripping.

Poster Clamp Skyliner 26

The Skyliner™ 26 is a flexible poster gripper with side hinge to allow for easy material loading and keeping the clamp locked ? rmly in place throughout the lifespan of your promotion. This Skyliner is perfect for gripping fabrics.

Poster Clamp Skyliner 31

The Skyliner™ 31 is designed for gripping thicker board and suitable for securing to a variety of materials.

Poster Clamp Skyliner 33

The Skyliner™ 33 is designed for gripping thicker board and suitable for securing to a variety of materials.

Poster Clamp Skyliner 41

Round banner tube with integral v-slit to grip posters and substrates. This product can also be used as a support tube for fabric or PVC banners but must be used in conjunction with Slide-In Hangers (Sold Seperately).

Plastic Tube Skyliner 50

Round banner tube which can also be used as a support tube for fabric or PVC banners.

Cable Ties

Cable Ties are an excellent means of holding tags, signs and banners firmly in place. For lighter applications, see Beaded Cable Tie

Beaded Cable Ties

Suitable for lighter applications to the standard Cable Tie.

S/A Mounting Block

Self-adhesive mounting block for use with Cable Ties up to 5mm in width. Primarily used for hanging POS banners, simply feed Cable Tie through the pad, attach to banner and use adhesive backing to fix to wall surface.

Showcard Struts

Strut with locking rudder for mounting of Showcards and display board.

Glide banner bases

Robust Banner Base with a brushed Aluminium finish and chrome end caps. Includes 3M adhesive, tension adjuster, interchangeable graphics kit and padded carry bag for easy transportation.

Clipper banner bases

A quick assembly, lightweight Banner Base with reinforced feet, positive pole locator, top rail clamp, 3M adhesive strips for graphic attachment and tension mechanism to ensure a taut and well presented poster. Padded carry bag included for easy transportation.

Lighthouse banner bases

A quick assembly, lightweight Banner Base with sturdy feet, top rail clamp, 3M adhesive strips for graphic attachment and tension mechanism to ensure a taut and well presented poster. Suppled in a zip-up bag.

Sail Eyelets

High quality Eyelets for use on reinforced banners. Suitable for outdoor use. Eyelets and Washers need to be ordered separately.

Self Piercing Eyelets

For use on reinforced banners. Set includes washer and eyelet.

Pro Banner Eyelet Kits

Kit includes a pack of 250 Self-Piercing Metal Eyelets and a HP200 Press to both cut holes and punch Eyelets into banner material.

Plastic eyelets - 2 part

Weather resistant Eyelets with an easy, click together application. Used as a method of reinforcing holes for POS display banners etc. Very easy to apply, ‘click’ together action. Weather resistant. Stocked in white, colours available for larger orders.

Eyelet tooling (HP200)

Eyelet closing tool for use in conjunction with the HP200 Banner Eyelet Press.

Eyelet Press - HP200

A sturdy bench-mounted press for the easy application of Self-Piercing Eyelets. Must be used in conjunction with a HP200 Banner Eyelet Press Tool.

Press (HP01) - Hand Operated

A benchtop mounted machine which will provide many years of trouble-free use. Ideal for any process including press studs, corners and catches.

Shock Cord - Ball Tie

A fast and convenient way of securing banners, posters and graphics firmly in place - suitable for both indoor and outdoor use.

Shock Cord - Hook Tie

Shock Cord with one hooked end to feed through a Sail Eyelet for a fast and convenient way of securing banners, posters and graphics in place. Suitable for both indoor and outdoor use.

Shock Cord - Double Hook Tie

Shock Cord with two hooked ends to feed through a Sail Eyelet for a fast and convenient way of securing banners, posters and graphics in place. Suitable for both indoor and outdoor use.

Shock Cord - Reels

Supplied in a roll, the elasticated Shock Cord is a durable and adaptable solution for holding banners taut both indoor and out.

A-Board Snap Frames

Sturdy and economical double-sided ‘A’ Board pavement sign with strong aluminium backing panel for added protection (also suitable for indoor use).

Wooden Pavement Signs

Monsoon heavy duty wooden pavement signs - can be built to your custom specifications. Easy graphics change, takes A0 size rigid material - contact us for more details.

Hurricane Swing Frames

Weatherproof Swing Frame pavement sign with water filled base for extra stability in demanding weather conditions. Graphic is protected with anti-glare panel, held in place by snap frame border (also suitable for indoor use).

Breeze Swing Frame

With a weighted base, the Breeze Swing Frame has been designed to withstand heavy weather conditions. The secure panel attachment can be supplied plain or we offer a bespoke service, and can print with your choice of artwork (also suitable for indoor use).

Snap Frames

Simply place the anti-glare PVC cover over your graphic and clip the 25mm frame down for a smart, sleek finish with mitred corners. The frame can be hung in either portrait or landscape orientation; portrait sizing shown.

Menu Board Free Standing

Free-standing sign holder for displaying information instore - leg height is fully adjustable and graphic holder can be rotated to either portrait or landscape orientation.

Poster Show Board

Wall mounted Poster holder with glazed lockable door which opens to 90° for effortless graphic change. The showboard is weather-resistant and suitable for outdoor use.

Single Leg Show Board

Free-standing sign holder with glazed lockable door which opens to 90° for effortless graphic change. The Showboard is 100% waterproof and suitable for outdoor use, leg height is not adjustable.

Display Stand Pole & Base

Pole with heavy base to be used in conjunction with Eclipse Snap Frame or Double Shelves (below).

Snap Frame for Display Pole

Snap Frame attachment for Eclipse Display Pole. Place the anti-glare PVC cover over your graphic and clip the 25mm frame down for a smart, sleek finish with mitred corners.

Display Stand Shelf - Acrylic

Double Shelf attachment for Eclipse Display Pole, holds A4 material in portrait orientation.

Display Stand Shelf - Steel

Double Shelf attachment for Eclipse Display Pole, holds A4 material in portrait orientation.

Stand Off Wall Mounts

The S05 will hold your signage 19mm from the wall, with a clearance hole of 10mm Ø. Please note that the finish can tarnish over time if mounted externally, best suited for internal use.

Stand Off Wall Mounts - LED Kits

Use our Wall Mount Kit to illuminate your signage with white LED light. Supplied in a set of 2 or 4 with connection box and transformer, clearance hole of 20mm Ø.

Wall Mount Panel Sets

Available as a single panel for surface mounted graphics or two panels for graphic enclosure, the A3 Wall Mount Panel set comes with four pre-drilled 10mm holes (centres at 460mm x 337mm), ? ame polished edges and your choice between Satin or Chrome Stand Off ? nish.

Cable Kits

Spring-loaded braided cable with floor and ceiling fixing attachments at each end. Kit includes screws, rawl plugs and allen key. Ideal for use with our Acrylic Poster Holders, a Cable Kit is a fantastic way to update your window display or get creative with a blank wall. Perfect for use in shops, restaurants, public information centres and exhibitions, the kit creates a professional and clear point of sale which is very easy to change when required.

Fast Find Visual Index