Fast Find Visual Index


Flat Diode Flashing LED

Flat Diode Flashing LED

High tech LED units with ultra slim SuperBright™ flashing LED diode that enables them to be mounted on very thin substrates without the LED protruding through - very handy when reverse mounting graphics onto glass. Single battery unit gives 3 months life.

Flashing LED with 1 battery & 3M pad

Flashing LED with 1 battery & 3M pad

Perfect for POS displays that need to stand out. Available in a range of colours and models dependent on the requirements of your display. Batteries included. 3M tape as standard

Flashing LED with 2 batteries

Flashing LED with 2 batteries

These innovative flashing LED units are designed to draw attention to any POS display. The unit has a self-adhesive pad to fix it to the back of your display to enable the flashing LED to protrude through a pre-punched hole. Twin battery version gives approx six months life.

Flashing LED with 3 batteries

Flashing LED with 3 batteries

These innovative flashing LED units are designed to draw attention to any POS display. The unit has a self-adhesive pad to fix it to the back of your display to enable the flashing LED to protrude through a pre-punched hole. Triple battery version gives approx nine months life.

LED Harness

LED Harness

Create a fully bespoke flashing light sequence for your FSDU or CDU display. Our LED harnesses come wired to any amount of bulbs that you desire. Choose your brand and campaign colours.

Aura Display Motors - 3rpm

Aura Display Motors - 3rpm

Offering a compact, stylish and fun way to introduce movement into your display, our Aura Multi Motors can perform 5 key movements, used in creating engaging POS and displays. With the introduction of multiple Aura Multi Motors, more elaborate displays are able to be produced.

Aura Display Motors - 6rpm

Aura Display Motors - 6rpm

Offering a compact, stylish and fun way to introduce movement into your display, our Aura Multi Motors can perform 5 key movements, used in creating engaging POS and displays. With the introduction of multiple Aura Multi Motors, more elaborate displays are able to be produced.

Aura Display Motors - 9rpm

Aura Display Motors - 9rpm

Offering a compact, stylish and fun way to introduce movement into your display, our Aura Multi Motors can perform 5 key movements, used in creating engaging POS and displays. With the introduction of multiple Aura Multi Motors, more elaborate displays are able to be produced.

Scent Sampler

Scent Sampler

Our Scent Samplers are the easiest way to introduce the sense of smell into your display, without creating an overpowering aroma. With Harrison you can create almost any smell for your display, and with an average lifespan of 4-6 weeks, you can be sure that your display will have maximum impact for the whole of your campaign. Once we've made your personalised scent, we soak the compound into super absorbent crystals. These are then sealed in a secure capsule that has been rigorously tested by our product development team. Each time the capsule is disturbed/shaked the scent is released and your customer can experience your product's fragrance, without having to open bottles or tamper with packaging. Once finished with the experience, customers simply release the capsule and our secure-pul

Die-Cut POS Holders

Die-Cut POS Holders

Fold-up leaflet dispenser offers a very economical way of displaying product details, promotional leaflets, and other information at the shelf edge. Top flap tucks into SEL Datastrip and needs no other form of fixing, making removal very quick and easy. These holders are part of our range of recyclable display components, and can be produced to any design and shape required

Self Adhesive Pockets - A sizes

Self Adhesive Pockets - A sizes

Premium self-adhesive pocket made of crystal clear, 80 micron Polypropylene. Available in A4 with short edge opening.

Self Adhesive Corner Pockets

Self Adhesive Corner Pockets

Recyclable self adhesive diagonal corner pockets for use inside folders and brochures, or use four as corner mounts for larger displays. Our range of recyclable FSDU and display components enable you to build fully recyclable displays.

S/A Pockets - Business Card sizes

S/A Pockets - Business Card sizes

Recyclable self adhesive business card pockets for folders, brochures, samples etc. The pocket has a thumb cut on the open edge, to allow for easy graphic loading and removal.

CD Pockets

CD Pockets

A range of self-adhesive pockets for CDs and DVDs.

Adjustable Display Feet

Adjustable Display Feet

Hinged display foot for use with dump bins and display units. 2-point foot with flexible corner joint. Gives a floor clearance of 12mm. Accepts boards up to 8mm thick and extends 48mm from the corner.

Data Strips

Data Strips

Clear scanner rail SEL datastrip label holder with self-adhesive strip for shelf edge display. This EPOS Ticket Strip is available plain or with top angle to fix to top edge of shelf. Sizes available include 17mm, 26mm, 30mm, 35mm, 39mm, 45mm, 52mm, 60mm and 76mm high. Lengths can be cut to order.

Recyclable Data Strips

Recyclable Data Strips

Recyclable scanner rail SEL datastrip label holder with self-adhesive strip for shelf edge display. This EPOS Ticket Strip is available plain or with top angle to fix to top edge of shelf. Made from ultra clear recyclable material as 35mm and 39mm high. Lengths can be cut to order. Our range of recyclable FSDU and display components enable you to build fully recyclable displays.

Wire Basket Data Strip

Wire Basket Data Strip

Clear PVC Data Strip to attach to wire basket displays. Lengths are cut to order.

Recyclable Hinged Data Strip

Recyclable Hinged Data Strip

Clear hinged datastrip with self-adhesive strip for shelf edge display. Lengths can be cut to order.

Flexible Hinge for Data Strips

Flexible Hinge for Data Strips

For use with data strips or plain barkers, these self-adhesive strips are part of our range of recyclable FSDU and display components, and can be attached to the shelf edge to create a swinging hinge design. This allows easy access to the shelf beneath for customers to quickly access products.

Angled Data Strip

Angled Data Strip

Clear PVC data strip holder for angled edges, with self-adhesive strip for shelf edge display. Stocked in two profile heights of 25mm and 39mm. Bespoke lengths are avaliable and can be cut to order.

Double Position Data Strip

Double Position Data Strip

This PVC Data Strip is perfectly designed to fit Tegometall and Caem shelving. Its versatile attachment means it will fix to the shelf in two positions depending on what is required. The double position data strip is stocked in 2105mm lengths ready to be cut down to specific lengths.

Flexible Hinge Profiles

Flexible Hinge Profiles

For use with our PVC barkers, this hinged profile allows you to fix your graphics to the top edge of display shelves, enabling you to provide pricing and product information.

Flexible Hinge Profile

Flexible Hinge Profile

Clear PVC extrusion with 12mm self adhesive foam strips. Will flex 180° in each direction.

J Profile Strip

J Profile Strip

Our J profile sections are designed for use with our PVC data strips and can be attached by the self-adhesive strip on the back. This can then be clipped onto the shelf edge to make sure your graphics stand out.

J Profile Gripper

J Profile Gripper

J Profile gripper for holding display boards. Accepts material 2mm thick.

Foam Tape s/a - High Bond ST

Foam Tape s/a - High Bond ST

High Bond foam tape ST

Foam Pads s/a

Foam Pads s/a

Self-adhesive Foam pads

Banner Tape High Bond

Banner Tape High Bond

High tack double sided tape for very demanding applications. We also sell branded Tesa® 4965, which is the industry-leading double-sided tape for a huge range of demanding applications.

Film Tape s/a - High Bond ST

Film Tape s/a - High Bond ST

Double sided strong bonding tape with acrylic adhesive for bonding a variety of materials.

Film Tape s/a - High Bond Perm/Peel

Film Tape s/a - High Bond Perm/Peel

Double sided rubber resin with the feature of permanent adhesive on one side and removable the other. For use when a display may need removing without causing surface damage.

Film Tape s/a - Finger Lift

Film Tape s/a - Finger Lift

Double -sided adhesive tape with extra width finger lift liner.

Glue Dots

Glue Dots

Glue dots in a choice of removable or permanent high tack adhesive. Supplied in dispenser box.

Carton Seal Discs

Carton Seal Discs

A range of self-adhesive sealing discs stocked in a choice of permanent or removable adhesive with an option of perforation on the permanent adhesive for easy opening.

Clear Perm/Peel Discs

Clear Perm/Peel Discs

Handy discs for mounting posters etc. without leaving residue. Supplied in packs of 100 sheets with 24 discs per sheet.

Magnetic Tape - self adhesive

Magnetic Tape - self adhesive

Can be provided to your bespoke lengths or in rolls. Available in both premium and standard formats.

Hook & Loop Coins

Hook & Loop Coins

Type 1 adhesive is suitable for polyprop, card, board etc. Type 2 adhesive is suitable for PVC (see terms and conditions)

Hook & Loop Tapes

Hook & Loop Tapes

Type 1 adhesive is suitable for polyprop, card, board etc. Type 2 adhesive is suitable for PVC (see terms and conditions)

Magnetic Insert Discs - s/a

Magnetic Insert Discs - s/a

Self adhesive magnetic disc for forming a closure on files, cases and boxes etc.

Metal Pen Holders

Metal Pen Holders

Spring metal pen holders. Very attractive and practical way of securing pens to displays

Pen Holders - plastic

Pen Holders - plastic

Plastic moulded penholders with self- adhesive backing

Badge Pin S/A

Badge Pin S/A

Self-adhesive badge brooch pin

S/A Metal Pin & Clip

S/A Metal Pin & Clip

Self-adhesive badge clip & pin

Sign Holder S/A Standard

Sign Holder S/A Standard

Sign holder with self adhesive base. Accepts boards up to 3mm thick.

Sign Holder S/A Hinged

Sign Holder S/A Hinged

Sign holder with flexible hinge and self adhesive base. Accepts boards up to 3mm thick.

Sign Holder S/A Narrow Base

Sign Holder S/A Narrow Base

Sign holder with self adhesive base. Accepts boards up to 3mm thick.

Sign Holder S/A heavy duty

Sign Holder S/A heavy duty

Sign holder with self-adhesive base. Accepts boards 2 - 6mm thick.

Card Holder S/A

Card Holder S/A

Card holder with self-adhesive base. Accepts cards up to 3mm thick.

Clear Plastic Sign Holder

Clear Plastic Sign Holder

Clear injection moulded card holder with self adhesive base. Holds card up to 2mm thick.

Plastic Spacers

Plastic Spacers

These handy little spacers are extensively used on displays to project cut out card, giving the design a 3D effect. This 3D effect also lends the spacer to being a great alternative to shelf edge wobblers.

Wobbler Spring - S/A

Wobbler Spring - S/A

Spring wobbler for POS signage. Self adhesive pads for direct attachment.

Shelf Wobbler - Straight

Shelf Wobbler - Straight

Clear tapered shelf wobbler strip with 2 self-adhesive pads. Available in two sizes, perfect for edge-shelf display.

Shelf Wobbler - T Shape

Shelf Wobbler - T Shape

Ultra clear PVC T-shaped shelf wobbler. Fits into scanner rail, and can easily be moved or relocated.

Shelf Wobbler - Tapered

Shelf Wobbler - Tapered

Ultra clear recyclable tapered shelf wobbler strip with 2 self adhesive pads. Our range of recyclable FSDU and display components enable you to build fully recyclable displays.

Wobbler - Paddle-end

Wobbler - Paddle-end

Plastic wobbler with 2x self-adhesive pads, for interactive signage.

Wobbler Aluminium

Wobbler Aluminium

Aluminium 'bendable' wobbler with 2 self adhesive pads.

Visto® Deli Ticket Holder

Visto® Deli Ticket Holder

Our Visto® Deli Ticket Holder is made from strong polystyrene material, allowing POS to be held firmly in place and provides a professional and clean finish. The POS material can be simply slotted into the holder and firmly secured in place whilst displaying price and product information on deli counters. Two size options are available.

Ceiling Hook s/a - Round

Ceiling Hook s/a - Round

Ceiling hook with self-adhesive base. Produced in high impact material for durability.

Ceiling Hook s/a - Oval

Ceiling Hook s/a - Oval

Ceiling hook with self adhesive base. Produced in high impact material for durability.

Ceiling Hook s/a - Rotating Hook

Ceiling Hook s/a - Rotating Hook

Ceiling hook with rotating hook and self adhesive base. Produced in high impact material for durability.

Stud Plate

Stud Plate

Stud plate for mounting POS and shelf-edge signage. Self-adhesive foam backing adheres to flat or uneven surfaces. These stud plates are part of our range of recyclable display components

Pole Gripper - Self Adhesive

Pole Gripper - Self Adhesive

White Plastic gripper, designed to clip over poles up to 32mm diameter/. With self adhesive foam pad for affixing signage.

Ceiling Hook S/A - Square J Hook

Ceiling Hook S/A - Square J Hook

Ceiling J hook with self adhesive base.

Showing 1 to 63 of 63 (1 Pages)
 Back to Top