Ceiling

Cliphead Display Hooks

Designed to clip onto display board between 2mm - 5mm thick, our Clip Head Display Hook boasts a generous sized backing plate to spread weight and ridged arm to disperse merchandise.

Rigid Cardholders

The Rigid Card Holder is supplied with two ready made apertures for hanging, but can be glued or screwed in place depending on your requirements.

Swing Data Strip

The Swing Data Strip can either be attached to the end of an Overarm Display Hook or clipped onto a wire basket display.

Foam Tape s/a - High Bond ST

Double-sided adhesive Foam Tape for lightweight applications such as mounting signage.

Foam Pads s/a

Double-sided adhesive Foam Pads for mounting lightweight signage. Supplied on a roll.

Banner Tape High Bond

High tack double sided adhesive tape suitable for demanding applications such as banner hemming.

Film Tape s/a - High Bond ST

Strong double-sided adhesive bonding tape suitable for demanding applications.

Film Tape s/a - High Bond Perm/Peel

Double-sided tape with permanent adhesive on one side and removable adhesive on the reverse to prevent surface damage.

Film Tape s/a - Finger Lift

Double-sided adhesive tape with wide fingerlift liner for easy application.

Sign Holder S/A Standard

Upright Sign Holder with self-adhesive base.

Sign Holder S/A Hinged

Sign holder with self-adhesive base and flexible hinge gripper to allow movement if knocked in store.

Sign Holder S/A Narrow Base

Our selection of transparent Narrow Base Sign Holders are available with either a self-adhesive or strong neo-magnet base, allowing for easy relocation instore.

Sign Holder S/A heavy duty

Suited for gripping thicker card, the Heavy Duty Sign Holder has a self-adhesive base for easy adhesion.

Card Holder S/A

Offering a slightly longer base to the Sign Holder, the Card Holder can be attached to surfaces using the self-adhesive base and holds light duty card.

The SignAbracket allows you to secure corrugated plastic signs to any type of support surface, in a number of versatile display options. Its versatility allows it to fit around poles, flat surfaces, corners and angles (also suitable for indoor use). The SignAbracket is specially designed to have multiple fixing possibilities, allowing you to secure your signage using screws, cable ties, rivets and even magnets.

Clear Plastic Sign Holder

Clear injection moulded card holder with self-adhesive base.

Banner Hanger Magnetic Arm

Strong magnetic banner hanger with adjustable 250mm long arm - c/w hooks.

Magnetic Telescopic Banner Hanger

This magnetic banner hanger extends from 570mm-950mm giving you flexibility when hanging your designs. The hanger attaches to shelves with a strong adjustable magnetic component ensuring material is always kept in place, even when your signage is knocked or caught. Being magnetic also gives you the flexibility to move your display, without sacrificing stability or practicality.

Telescopic Banner Hanger - Twin Slot

This telescopic banner hanger is perfect for heavier prints. The hanger has been developed with a twin-slot attachment that locks into retail shelving or racking, allowing strong support for the print, giving it extra protection when knocked in-store. Extendable from lengths 570mm - 950mm, this product provides an adaptable solution that can be adjusted to hold a variety of designs for future use.

Showcard Stand Wire Basket Frame Holder

Pole with spring-loaded mechanism to ensure easy attachment to wire basket or dump bin display. Includes transparent T-Piece to hold Showcard Frame.

Showcard Stand Frames

Ideal for in-store promotion, the Showcard Frame can display double-sided graphics and can be easily accessed to change via side opening.

Showcard Poster Pocket - A4

Non-reflective Poster Pocket to protect print in Showcard Frame.

Showcard Attachment - Rotating Clips

Insert Showcard Frame into gripper to hang from inbuilt hook.

Showcard Attachment - Fixed Clips

Fixed Clip for attaching to two sides of a Showcard Frame to enable hanging from cables, wire rails and shelf edges.

Showcard Attachment - Magnetic Clip

With a strong magnetic base, insert Showcard Frame into gripper to hold upright on magnetic surface.

Poster Clamp Skyliner 11

Ideal for instore display, each kit comes with a top and bottom rail, end caps and two hanging clips, so all you need to do is attach your poster and fix to the ceiling.

Poster Clamp Skyliner 24

Designed to hold thinner material, the Skyliner™ 24 is built with a very tight grip and snap-shut frame to help prevent a display from bending or ripping.

Poster Clamp Skyliner 26

The Skyliner™ 26 is a flexible poster gripper with side hinge to allow for easy material loading and keeping the clamp locked ? rmly in place throughout the lifespan of your promotion. This Skyliner is perfect for gripping fabrics.

Poster Clamp Skyliner 31

The Skyliner™ 31 is designed for gripping thicker board and suitable for securing to a variety of materials.

Poster Clamp Skyliner 33

The Skyliner™ 33 is designed for gripping thicker board and suitable for securing to a variety of materials.

Poster Clamp Skyliner 41

Round banner tube with integral v-slit to grip posters and substrates. This product can also be used as a support tube for fabric or PVC banners but must be used in conjunction with Slide-In Hangers (Sold Seperately).

Plastic Tube Skyliner 50

Round banner tube which can also be used as a support tube for fabric or PVC banners.

Pot Magnet & Hook

Our Pot Magnet Hook is an excellent alternative to a self-adhesive display solution. The magnet is embedded in a steel pot, creating a stronger adhesive pull when in direct contact with other magnetic surfaces.

Ceiling Magnet - open hook

Fits neatly into suspended ceiling grid with open hook for attaching signage.

Round Ceiling Hook

With a self-adhesive base, our range of Ceiling Hooks fit neatly onto the grid of a suspended ceiling.

Oval Ceiling Hook

With a self-adhesive base, our range of Ceiling Hooks fit neatly onto the grid of a suspended ceiling.

Rotating Ceiling Hook

With a self-adhesive base, our range of Ceiling Hooks fit neatly onto the grid of a suspended ceiling.

T-Grip Ceiling Hook

The T-Grip will clip securely onto the bar of a standard ceiling grid to give a sturdy and efficient solution to hang banners and signage in-store.

Stud Plate

The Stud Plate is a handy solution for hanging a product, simply fix to a flat surface using the 20mmØ self-adhesive foam pad on the reverse.

Pole Gripper

The Pole Gripper can be clipped over onto a pole between 28mm - 32mm Ø and offers a flat surface with self-adhesive foam pad for signage gripper to be affixed.

'J' Hook

Attach J Hook to ceiling using the self-adhesive backing and hang signage from hook.

Eagle Clip

The Eagle Clip is a quick push-fit ceiling clip which grips strongly to a standard suspended ceiling grid. Attach the 1820mm cord to your signage and adjust to the height required.

Wire hook with nylon line

Wire hook with 1.5m nylon line attached.

Nylon Line

Transparent Nylon Line for display use with handy wrist spool.

Mobile String

Mobile Cord with beaded ends for light duty hanging applications.

Metal Pear Clip

Pear-shaped hook for hanging or linking signage.

Ceiling Hook - Grid Clip

Spring metal for attaching to standard ceiling ‘T’ grid.

S Hook Crimped

Metal S-shaped hook with crimped end for tightly hanging items such as Clip Strips.

Ceiling Hook - C

Metal C-shaped hook for hanging or linking signage.

Metal 'S' Hooks

Metal S-shaped hook for hanging or linking signage.

Double-ended Hook

Ideal for suspending POS displays or connecting signage.

Spring Hook

With a spring coil attached between the two hooks, this product is ideal for suspending or connecting signage of varying length - suitable for both indoor and outdoor use.

C Hook - plastic

C-shaped joining hook for hanging or linking signage.

S Hook - plastic

S-shaped joining hook for hanging or linking signage.

S Hook Crimped - Plastic

S-shaped joining hook with crimped end for tightly hanging items such as Clip Strips.

Joining Ring - Oval

Plastic joining rings for hanging or linking signage.

Joining Ring - Round

Plastic joining rings for hanging or linking signage.

Cable Ties

Cable Ties are an excellent means of holding tags, signs and banners firmly in place. For lighter applications, see Beaded Cable Tie

Beaded Cable Ties

Suitable for lighter applications to the standard Cable Tie.

S/A Mounting Block

Self-adhesive mounting block for use with Cable Ties up to 5mm in width. Primarily used for hanging POS banners, simply feed Cable Tie through the pad, attach to banner and use adhesive backing to fix to wall surface.

Hinged Ring

With a central hinge, this binding ring is ideal for swatches and hanging applications.

Split Ring (Nickel)

The Split Ring is an extremely multipurpose product, used for hanging tags or other POS items.

Cable Kits

Spring-loaded braided cable with floor and ceiling fixing attachments at each end. Kit includes screws, rawl plugs and allen key. Ideal for use with our Acrylic Poster Holders, a Cable Kit is a fantastic way to update your window display or get creative with a blank wall. Perfect for use in shops, restaurants, public information centres and exhibitions, the kit creates a professional and clear point of sale which is very easy to change when required.

Fast Find Visual Index